Regardless it’s for your own safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are in every case operational is necessary. In fact, bulbs are wearing parts that will undoubtedly burn out after a while and as a result need to be swapped out. You’re most likely here because one of your parking lights is burnt out and you’re wanting to know how to change your PORSCHE PANAMERA’s license plate bulb, we’ve written and published this article content to help you do it all on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your PORSCHE PANAMERA.
How to swap the license plate bulb on your PORSCHE PANAMERA coming from the outside
This tactic is the quickest of the two, in fact, for this one you will only have to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article to clarify the approach.
So let’s begin with changing the number plate bulb by going through the outside of your PORSCHE PANAMERA. Regardless it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple guidelines to stick to to perform this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your PORSCHE PANAMERA
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are afraid of breaking a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the task.
.
How to change the number plate bulb on your PORSCHE PANAMERA without outside access
Second part of our article, change this license plate bulb on your PORSCHE PANAMERA without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my PORSCHE PANAMERA
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my PORSCHE PANAMERA
Finally last possibility, you must swap the bulb on the backplate of your PORSCHE PANAMERA, but you cannot open the cover from the outside of your motor vehicle. In such a case, here is the tactic to execute this task:
- Disconnect the battery from your PORSCHE PANAMERA
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your PORSCHE PANAMERA, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your PORSCHE PANAMERA. If you wish to change other bulbs like the position light bulbs on your PORSCHE PANAMERA or the low beam bulbs on PORSCHE PANAMERA, don’t hesitate to browse our content articles which describe you the process to follow.
If perhaps you have any additional questions about the PORSCHE PANAMERA, do not hesitate to consult our PORSCHE PANAMERA category.
