Regardless whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always working is necessary. Indeed, bulbs are wearing auto parts that will undoubtedly burn out over the years and therefore need to be changed. You’re almost certainly on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Porsche Macan’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Porsche Macan.
How to swap the license plate bulb on your Porsche Macan coming from the outside
This process is the most simple of the two, in reality, for this one you will just have to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article to clarify the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Porsche Macan. Regardless whether it’s the front or the back of your automobile the operation will be the same.
Here are a few simple guidelines to follow to perform this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Porsche Macan
- Use your screwdriver or knife to eject the bulb from its placement, if you are scared of destroying anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the process.
.
How to change the number plate bulb on your Porsche Macan without outside access
Second part of our item, replace this license plate bulb on your Porsche Macan without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Porsche Macan
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Porsche Macan
Finally last possibility, you must swap the bulb on the backplate of your Porsche Macan, but you are not able to open the cover from the outside of your automobile. In this instance, here is the tactic to perform this task:
- Unplug the battery from your Porsche Macan
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Porsche Macan, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main tactics for replacing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Porsche Macan. If you desire to change other bulbs like the position light bulbs on your Porsche Macan or the low beam bulbs on Porsche Macan, don’t hesitate to consult our content articles which explain you the process to follow.
If you wish more guides on the Porsche Macan, go to our Porsche Macan category.
