Regardless it’s for your personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly functional is fundamental. Indeed, bulbs are wearing auto parts that will predictably burn out with time and as a result need to be changed. You’re most certainly on the website because one of your parking lights is burnt out and you’re questioning how to change your Porsche Cayenne’s license plate bulb, we’ve written and published this content to help you do it by yourself and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Porsche Cayenne.
How to replace the license plate bulb on your Porsche Cayenne throughout the outside
This technique is the least difficult of the two, in reality, for this one you will simply need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this document to demonstrate the way.
So let’s begin with changing the number plate bulb by going through the outside of your Porsche Cayenne. Regardless it’s the front or the back of your vehicle the operation will be the same.
Here are a few simple steps to follow to perform this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Porsche Cayenne
- Use your screwdriver or knife to remove the bulb from its place, if you are afraid of destroying a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.
.
How to change the number plate bulb on your Porsche Cayenne without outside access
Second section of our content page, replace this license plate bulb on your Porsche Cayenne without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Porsche Cayenne
To replace the one on the front plate, nothing could be easier, you will have to put yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Porsche Cayenne
Finally last option, you must replace the bulb on the backplate of your Porsche Cayenne, but you cannot open the cover from the outside of your vehicle. In such a case, here is the technique to execute this task:
- Disconnect the battery from your Porsche Cayenne
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Porsche Cayenne, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Porsche Cayenne. If you wish to change other bulbs like the position light bulbs on your Porsche Cayenne or the low beam bulbs on Porsche Cayenne, don’t be reluctant to browse our content articles which demonstrate you the procedure to follow.
In the event that you have any further questions about the Porsche Cayenne, do not hesitate to consult our Porsche Cayenne category.
