Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time functioning is extremely important. In fact, bulbs are wearing parts that will undoubtedly burn out with time and as a result need to be swapped out. You’re probably on the website because one of your parking lights is burnt out and you’re worried about how to change your PORSCHE BOXSTER’s license plate bulb, we’ve written this article content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your PORSCHE BOXSTER.
How to replace the license plate bulb on your PORSCHE BOXSTER throughout the outside
This process is the least difficult of the two, in truth, for this one you will simply have to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article to clarify the approach.
So let’s start with changing the number plate bulb by going through the outside of your PORSCHE BOXSTER. Whether it’s the front or the back of your vehicle the method will be the same.
Here are a few simple steps to stick to to perform this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your PORSCHE BOXSTER
- Use your screwdriver or knife to eject the bulb from its location, in the event you are afraid of breaking anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the process.
.
How to change the number plate bulb on your PORSCHE BOXSTER without outside access
Second part of our content page, change this license plate bulb on your PORSCHE BOXSTER without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my PORSCHE BOXSTER
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my PORSCHE BOXSTER
Finally last option, you must replace the bulb on the backplate of your PORSCHE BOXSTER, but you are not able to open the cover from the outside of your vehicle. In such a case, here is the process to do this task:
- Disconnect the battery from your PORSCHE BOXSTER
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your PORSCHE BOXSTER, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your PORSCHE BOXSTER. If you want to change other bulbs like the position light bulbs on your PORSCHE BOXSTER or the low beam bulbs on PORSCHE BOXSTER, don’t hesitate to read our articles which explain you the procedure to follow.
In the event that you have any further questions about the PORSCHE BOXSTER, do not hesitate to consult our PORSCHE BOXSTER category.
