Whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time functional is really important. In fact, bulbs are wearing units that will undoubtedly burn out after some time and as a result need to be changed. You’re most likely in this article because one of your parking lights is burnt out and you’re questioning how to change your Peugeot Traveller’s license plate bulb, we’ve made this content to help you do it without any help and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot Traveller.
How to swap the license plate bulb on your Peugeot Traveller coming from the outside
This solution is the quickest of the two, in reality, for this one you will simply need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this content to clarify the method.
So let’s begin with changing the number plate bulb by going through the outside of your Peugeot Traveller. Whether it’s the front or the back of your car the operation will be the same.
Here are a few simple steps to follow to conduct this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot Traveller
- Use your screwdriver or knife to remove the bulb from its spot, in the event you are worried of destroying a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Peugeot Traveller without outside access
Second part of our item, replace this license plate bulb on your Peugeot Traveller without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Peugeot Traveller
To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Peugeot Traveller
Finally last option, you must swap the bulb on the backplate of your Peugeot Traveller, but you simply cannot open the cover from the outside of your car. In this case, here is the tactic to carry out this task:
- Disconnect the battery from your Peugeot Traveller
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Peugeot Traveller, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Peugeot Traveller. If you need to change other bulbs like the position light bulbs on your Peugeot Traveller or the low beam bulbs on Peugeot Traveller, don’t be reluctant to read our articles which demonstrate you the process to follow.
If perhaps you have any further questions about the Peugeot Traveller, do not hesitate to consult our Peugeot Traveller category.
