Regardless it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly working is very important. In reality, bulbs are wearing auto parts that will obviously burn out over the years and as a result need to be changed. You’re most certainly here because one of your parking lights is burnt out and you’re wanting to know how to change your Peugeot Rcz’s license plate bulb, we’ve made this article content to help you do it on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot Rcz.
How to change the license plate bulb on your Peugeot Rcz through the outside
This option is the easiest of the two, in reality, for this one you will only require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article to demonstrate the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Peugeot Rcz. Regardless it’s the front or the back of your motor vehicle the process will be similar.
Here are a few simple actions to follow to perform this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot Rcz
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are scared of damaging anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Peugeot Rcz without outside access
Second part of our content, swap this license plate bulb on your Peugeot Rcz without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Peugeot Rcz
To change the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Peugeot Rcz
Finally last possibility, you must change the bulb on the backplate of your Peugeot Rcz, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the tactic to perform this task:
- Disconnect the battery from your Peugeot Rcz
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot Rcz, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Peugeot Rcz. If you wish to change other bulbs like the position light bulbs on your Peugeot Rcz or the low beam bulbs on Peugeot Rcz, don’t hesitate to read our content articles which demonstrate you the operation to follow.
Whenever you have any additional questions about the Peugeot Rcz, do not hesitate to consult our Peugeot Rcz category.
