Regardless whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are constantly functioning is necessary. Indeed, bulbs are wearing auto parts that will obviously burn out over the years and consequently need to be swapped out. You’re quite likely on this website because one of your parking lights is burnt out and you’re wondering how to change your Peugeot Expert’s license plate bulb, we’ve created this content to help you do it all on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot Expert.
How to replace the license plate bulb on your Peugeot Expert through the outside
This tactic is the least difficult of the two, in truth, for this one you will only require to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content page to show you the method.
So let’s start with changing the number plate bulb by going through the outside of your Peugeot Expert. Regardless whether it’s the front or the back of your motor vehicle the operation will be identical.
Here are a few simple actions to follow to carry out this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot Expert
- Use your screwdriver or knife to remove the bulb from its spot, if you are worried of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the success of the task.
.
How to change the number plate bulb on your Peugeot Expert without outside access
Second part of our document, change this license plate bulb on your Peugeot Expert without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Peugeot Expert
To replace the one on the front plate, nothing could be less hard, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Peugeot Expert
Finally last option, you must replace the bulb on the backplate of your Peugeot Expert, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the process to accomplish this operation:
- Unplug the battery from your Peugeot Expert
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot Expert, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for changing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Peugeot Expert. If you desire to change other bulbs like the position light bulbs on your Peugeot Expert or the low beam bulbs on Peugeot Expert, don’t hesitate to read our content articles which describe you the process to follow.
To get more tips on the Peugeot Expert, take a look at the Peugeot Expert category.
