Whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case working is fundamental. In reality, bulbs are wearing parts that will obviously burn out as time passes and as a result need to be changed. You’re quite likely on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Peugeot 508’s license plate bulb, we’ve created this document to help you do it by yourself and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot 508.

change-license-plate-bulb-peugeot-508

How to replace the license plate bulb on your Peugeot 508 coming from the outside

This method is the quickest of the two, in reality, for this one you will just need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this article content to explain the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Peugeot 508. Whether it’s the front or the back of your automobile the operation will be identical.
Here are a few simple steps to follow to carry out this maintenance:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 508
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event you are worried of destroying a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the operation.

How to change the number plate bulb on your Peugeot 508 without outside access

Second part of our item, swap this license plate bulb on your Peugeot 508 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Peugeot 508

To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much force or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Peugeot 508

Finally last option, you must replace the bulb on the backplate of your Peugeot 508, but you cannot open the cover from the outside of your automobile. In this case, here is the technique to operate this task:

  • Disconnect the battery from your Peugeot 508
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Peugeot 508, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main methods for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Peugeot 508. If you want to change other bulbs like the position light bulbs on your Peugeot 508 or the low beam bulbs on Peugeot 508, don’t be reluctant to browse our articles which describe you the process to follow.

To get more tips on the Peugeot 508, take a look at the Peugeot 508 category.