Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always operational is very important. Indeed, bulbs are wearing units that will inevitably burn out with time and as a result need to be changed. You’re perhaps here because one of your parking lights is burnt out and you’re questioning how to change your Peugeot 5008’s license plate bulb, we’ve created this article content to help you do it by yourself and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot 5008.
How to swap the license plate bulb on your Peugeot 5008 throughout the outside
This process is the most simple of the two, in fact, for this one you will simply need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this document to explain the way.
So let’s begin with changing the number plate bulb by going through the outside of your Peugeot 5008. Regardless it’s the front or the back of your vehicle the method will be similar.
Here are a few simple steps to stick to to execute this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 5008
- Use your screwdriver or knife to remove the bulb from its location, if you are worried of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to replace the number plate bulb on your Peugeot 5008 without outside access
Second part of our content page, swap this license plate bulb on your Peugeot 5008 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Peugeot 5008
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Peugeot 5008
Finally last solution, you must swap the bulb on the backplate of your Peugeot 5008, but you cannot really open the cover from the outside of your vehicle. In this case, here is the technique to accomplish this task:
- Disconnect the battery from your Peugeot 5008
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Peugeot 5008, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for changing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Peugeot 5008. If you want to change other bulbs like the position light bulbs on your Peugeot 5008 or the low beam bulbs on Peugeot 5008, don’t be reluctant to browse our content articles which explain you the operation to follow.
Whenever you have any additional questions about the Peugeot 5008, do not hesitate to consult our Peugeot 5008 category.
