It doesn’t matter if it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time effective is very important. Indeed, bulbs are wearing units that will undoubtedly burn out after some time and as a consequence need to be changed. You’re almost certainly here because one of your parking lights is burnt out and you’re struggling with how to change your Peugeot 4008’s license plate bulb, we’ve written and published this content to help you do it without any help and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot 4008.
How to swap the license plate bulb on your Peugeot 4008 coming from the outside
This technique is the simplest of the two, in fact, for this one you will only need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this article content to clarify the approach.
So let’s start with changing the number plate bulb by going through the outside of your Peugeot 4008. It doesn’t matter if it’s the front or the back of your vehicle the operation will be similar.
Here are a few simple actions to follow to conduct this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 4008
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are scared of destroying anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the task.
.
How to replace the number plate bulb on your Peugeot 4008 without outside access
Second part of our content, replace this license plate bulb on your Peugeot 4008 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Peugeot 4008
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Peugeot 4008
Finally last possibility, you must swap the bulb on the backplate of your Peugeot 4008, but you are not able to open the cover from the outside of your vehicle. In such a case, here is the method to perform this task:
- Disconnect the battery from your Peugeot 4008
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Peugeot 4008, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main tactics for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Peugeot 4008. If you desire to change other bulbs like the position light bulbs on your Peugeot 4008 or the low beam bulbs on Peugeot 4008, don’t be reluctant to read our articles which explain you the procedure to follow.
If perhaps you have any additional questions about the Peugeot 4008, do not hesitate to consult our Peugeot 4008 category.
