It doesn’t matter if it’s for your specific safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always functioning is necessary. In reality, bulbs are wearing parts that will surely burn out after a while and as a result need to be changed. You’re almost certainly in this article because one of your parking lights is burnt out and you’re questioning how to change your Peugeot 4007’s license plate bulb, we’ve written this article content to help you do it by yourself and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot 4007.

change-license-plate-bulb-peugeot-4007

How to change the license plate bulb on your Peugeot 4007 throughout the outside

This option is the simplest of the two, actually, for this one you will only require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this content page to demonstrate the way.
So let’s start with replacing the number plate bulb by going through the outside of your Peugeot 4007. It doesn’t matter if it’s the front or the back of your automobile the process will be the same.
Here are a few simple steps to stick to to execute this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 4007
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event that you are worried of damaging something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the process.

How to change the number plate bulb on your Peugeot 4007 without outside access

Second section of our article, change this license plate bulb on your Peugeot 4007 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Peugeot 4007

To change the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Peugeot 4007

Finally last option, you must change the bulb on the backplate of your Peugeot 4007, but you cannot open the cover from the outside of your automobile. In this instance, here is the tactic to execute this operation:

  • Unplug the battery from your Peugeot 4007
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Peugeot 4007, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Peugeot 4007. If you desire to change other bulbs like the position light bulbs on your Peugeot 4007 or the low beam bulbs on Peugeot 4007, don’t hesitate to read our content articles which explain you the process to follow.

To discover more tips on the Peugeot 4007, take a look at the Peugeot 4007 category.