It doesn’t matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case functioning is extremely important. Indeed, bulbs are wearing parts that will inevitably burn out after awhile and therefore need to be replaced. You’re perhaps in this article because one of your parking lights is burnt out and you’re struggling with how to change your Peugeot 309’s license plate bulb, we’ve made this content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot 309.
How to swap the license plate bulb on your Peugeot 309 through the outside
This approach is the quickest of the two, in fact, for this one you will just need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content page to describe the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Peugeot 309. It doesn’t matter if it’s the front or the back of your vehicle the technique will be the same.
Here are a few simple steps to follow to conduct this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 309
- Use your screwdriver or knife to eject the bulb from its location, if you are worried of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the successfulness of the process.
.
How to change the number plate bulb on your Peugeot 309 without outside access
Second section of our item, replace this license plate bulb on your Peugeot 309 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Peugeot 309
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Peugeot 309
Finally last possibility, you must swap the bulb on the backplate of your Peugeot 309, but you are not able to open the cover from the outside of your vehicle. In this instance, here is the approach to do this task:
- Disconnect the battery from your Peugeot 309
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot 309, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Peugeot 309. If you want to change other bulbs like the position light bulbs on your Peugeot 309 or the low beam bulbs on Peugeot 309, don’t be reluctant to browse our content articles which explain you the procedure to follow.
If perhaps you have any further questions about the Peugeot 309, do not hesitate to consult our Peugeot 309 category.
