Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly functioning is really important. In fact, bulbs are wearing auto parts that will surely burn out over the years and consequently need to be changed. You’re likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your Peugeot 307’s license plate bulb, we’ve created this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot 307.
How to change the license plate bulb on your Peugeot 307 throughout the outside
This technique is the quickest of the two, in fact, for this one you will just need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this content to explain the way.
So let’s begin with changing the number plate bulb by going through the outside of your Peugeot 307. Regardless it’s the front or the back of your automobile the operation will be identical.
Here are a few simple steps to follow to carry out this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 307
- Use your screwdriver or knife to remove the bulb from its spot, in the event you are worried of breaking something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the success of the procedure.
.
How to replace the number plate bulb on your Peugeot 307 without outside access
Second section of our article, change this license plate bulb on your Peugeot 307 without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Peugeot 307
To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force otherwise you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Peugeot 307
Finally last solution, you must change the bulb on the backplate of your Peugeot 307, but you simply cannot open the cover from the outside of your automobile. In this case, here is the solution to do this task:
- Disconnect the battery from your Peugeot 307
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot 307, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Peugeot 307. If you wish to change other bulbs like the position light bulbs on your Peugeot 307 or the low beam bulbs on Peugeot 307, don’t hesitate to consult our articles which describe you the process to follow.
Whenever you have any additional questions about the Peugeot 307, do not hesitate to consult our Peugeot 307 category.
