Regardless it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always effective is extremely important. In reality, bulbs are wearing auto parts that will obviously burn out over time and therefore need to be swapped out. You’re likely on this website because one of your parking lights is burnt out and you’re wondering how to change your Opel Vectra’s license plate bulb, we’ve written and published this document to help you do it on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Opel Vectra.

change-license-plate-bulb-opel-vectra

How to swap the license plate bulb on your Opel Vectra through the outside

This approach is the simplest of the two, actually, for this one you will just have to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article content to explain the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Opel Vectra. Regardless it’s the front or the back of your automobile the process will be the same.
Here are a few simple steps to stick to to carry out this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Opel Vectra
  • .

  • Use your screwdriver or knife to remove the bulb from its location, if you are worried of damaging a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the success of the task.

How to change the number plate bulb on your Opel Vectra without outside access

Second part of our item, replace this license plate bulb on your Opel Vectra without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Opel Vectra

To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Opel Vectra

Finally last solution, you must swap the bulb on the backplate of your Opel Vectra, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the approach to conduct this operation:

  • Unplug the battery from your Opel Vectra
  • Locate the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Opel Vectra, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main tactics for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Opel Vectra. If you wish to change other bulbs like the position light bulbs on your Opel Vectra or the low beam bulbs on Opel Vectra, don’t be reluctant to browse our content articles which describe you the operation to follow.

In the event that you have any additional questions about the Opel Vectra, do not hesitate to consult our Opel Vectra category.