It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is extremely important. Indeed, bulbs are wearing parts that will surely burn out after awhile and consequently need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re wondering how to change your Opel Meriva’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Opel Meriva.
How to swap the license plate bulb on your Opel Meriva throughout the outside
This option is the most simple of the two, actually, for this one you will simply need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article to show you the way.
So let’s start with replacing the number plate bulb by going through the outside of your Opel Meriva. It doesn’t matter if it’s the front or the back of your vehicle the process will be the same.
Here are a few simple actions to stick to to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Opel Meriva
- Use your screwdriver or knife to eject the bulb from its place, if you are worried of damaging a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the achievement of the operation.
.
How to change the number plate bulb on your Opel Meriva without outside access
Second section of our article, swap this license plate bulb on your Opel Meriva without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Opel Meriva
To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Opel Meriva
Finally last possibility, you must swap the bulb on the backplate of your Opel Meriva, but you are not able to open the cover from the outside of your vehicle. In this instance, here is the process to conduct this task:
- Disconnect the battery from your Opel Meriva
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Opel Meriva, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main methods for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Opel Meriva. If you need to change other bulbs like the position light bulbs on your Opel Meriva or the low beam bulbs on Opel Meriva, don’t hesitate to read our content articles which explain you the procedure to follow.
To find more tips on the Opel Meriva, take a look at the Opel Meriva category.
