It doesn’t matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time functional is very important. In reality, bulbs are wearing auto parts that will undoubtedly burn out with time and as a result need to be swapped out. You’re most certainly on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Opel Insignia’s license plate bulb, we’ve made this content page to help you do it by yourself and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Opel Insignia.

change-license-plate-bulb-opel-insignia

How to change the license plate bulb on your Opel Insignia through the outside

This technique is the easiest of the two, in fact, for this one you will only have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this article to describe the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Opel Insignia. It doesn’t matter if it’s the front or the back of your car the method will be identical.
Here are a few simple steps to follow to execute this service:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Opel Insignia
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are scared of destroying anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to confirm the successfulness of the procedure.

How to replace the number plate bulb on your Opel Insignia without outside access

Second section of our article, change this license plate bulb on your Opel Insignia without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Opel Insignia

To change the one on the front plate, nothing could be less hard, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.

How to change the rear license plate bulb on my Opel Insignia

Finally last solution, you must change the bulb on the backplate of your Opel Insignia, but you cannot open the cover from the outside of your car. In this instance, here is the process to operate this task:

  • Unplug the battery from your Opel Insignia
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Opel Insignia, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main techniques for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Opel Insignia. If you need to change other bulbs like the position light bulbs on your Opel Insignia or the low beam bulbs on Opel Insignia, don’t be reluctant to consult our content articles which describe you the operation to follow.

To discover more tips on the Opel Insignia, take a look at the Opel Insignia category.