Regardless whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly functional is very important. Indeed, bulbs are wearing parts that will surely burn out over the years and therefore need to be changed. You’re almost certainly in this article because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Versa’s license plate bulb, we’ve made this document to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Versa.
How to replace the license plate bulb on your Nissan Versa throughout the outside
This approach is the least difficult of the two, in fact, for this one you will only have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this article to demonstrate the approach.
So let’s start with changing the number plate bulb by going through the outside of your Nissan Versa. Regardless whether it’s the front or the back of your vehicle the operation will be identical.
Here are a few simple actions to stick to to execute this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Versa
- Use your screwdriver or knife to eject the bulb from its placement, if you are worried of breaking something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the successfulness of the process.
.
How to change the number plate bulb on your Nissan Versa without outside access
Second section of our article, change this license plate bulb on your Nissan Versa without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Nissan Versa
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Nissan Versa
Finally last possibility, you must replace the bulb on the backplate of your Nissan Versa, but you cannot open the cover from the outside of your vehicle. In this case, here is the process to perform this task:
- Unplug the battery from your Nissan Versa
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Versa, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Nissan Versa. If you desire to change other bulbs like the position light bulbs on your Nissan Versa or the low beam bulbs on Nissan Versa, don’t hesitate to consult our content articles which explain you the procedure to follow.
If you wish more tutorials on the Nissan Versa, go to our Nissan Versa category.
