Regardless it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly effective is really important. In fact, bulbs are wearing units that will predictably burn out in the future and as a consequence need to be replaced. You’re almost certainly on this site because one of your parking lights is burnt out and you’re struggling with how to change your Nissan Qashqai’s license plate bulb, we’ve created this content to help you do it without any help and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Qashqai.
How to change the license plate bulb on your Nissan Qashqai throughout the outside
This tactic is the quickest of the two, in fact, for this one you will simply have to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this content to show you the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan Qashqai. Regardless it’s the front or the back of your vehicle the operation will be identical.
Here are a few simple steps to stick to to carry out this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Qashqai
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are afraid of damaging something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.
.
How to change the number plate bulb on your Nissan Qashqai without outside access
Second part of our article, replace this license plate bulb on your Nissan Qashqai without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Nissan Qashqai
To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Nissan Qashqai
Finally last possibility, you must change the bulb on the backplate of your Nissan Qashqai, but you are not able to open the cover from the outside of your vehicle. In this instance, here is the approach to execute this task:
- Disconnect the battery from your Nissan Qashqai
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Qashqai, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Nissan Qashqai. If you desire to change other bulbs like the position light bulbs on your Nissan Qashqai or the low beam bulbs on Nissan Qashqai, don’t hesitate to browse our content articles which describe you the process to follow.
If you wish more guides on the Nissan Qashqai, go to our Nissan Qashqai category.
