Regardless whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are in every case working is very important. In fact, bulbs are wearing auto parts that will undoubtedly burn out in the future and as a result need to be replaced. You’re most likely here because one of your parking lights is burnt out and you’re worried about how to change your Nissan Qashqai 2’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Qashqai 2.
How to swap the license plate bulb on your Nissan Qashqai 2 coming from the outside
This option is the easiest of the two, in fact, for this one you will only need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content to describe the way.
So let’s start with swapping the number plate bulb by going through the outside of your Nissan Qashqai 2. Regardless whether it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple steps to follow to carry out this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Qashqai 2
- Use your screwdriver or knife to eject the bulb from its spot, if you are afraid of damaging anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the procedure.
.
How to replace the number plate bulb on your Nissan Qashqai 2 without outside access
Second part of our item, replace this license plate bulb on your Nissan Qashqai 2 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Nissan Qashqai 2
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Nissan Qashqai 2
Finally last option, you must swap the bulb on the backplate of your Nissan Qashqai 2, but you cannot really open the cover from the outside of your automobile. In this instance, here is the tactic to accomplish this operation:
- Disconnect the battery from your Nissan Qashqai 2
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Nissan Qashqai 2, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Nissan Qashqai 2. If you need to change other bulbs like the position light bulbs on your Nissan Qashqai 2 or the low beam bulbs on Nissan Qashqai 2, don’t be reluctant to consult our articles which demonstrate you the process to follow.
To get more tips on the Nissan Qashqai 2, take a look at the Nissan Qashqai 2 category.
