Whether it’s for your personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always functional is extremely important. In fact, bulbs are wearing units that will undoubtedly burn out with time and as a result need to be changed. You’re quite likely here because one of your parking lights is burnt out and you’re wondering how to change your Nissan Navara’s license plate bulb, we’ve made this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Navara.

change-license-plate-bulb-nissan-navara

How to replace the license plate bulb on your Nissan Navara coming from the outside

This solution is the fastest of the two, actually, for this one you will only require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this article content to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan Navara. Whether it’s the front or the back of your motor vehicle the technique will be identical.
Here are a few simple guidelines to stick to to perform this service:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Navara
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, in the event that you are scared of breaking something, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the operation.

How to change the number plate bulb on your Nissan Navara without outside access

Second section of our content page, replace this license plate bulb on your Nissan Navara without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Nissan Navara

To replace the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Nissan Navara

Finally last option, you must replace the bulb on the backplate of your Nissan Navara, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the process to perform this task:

  • Unplug the battery from your Nissan Navara
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Nissan Navara, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Nissan Navara. If you want to change other bulbs like the position light bulbs on your Nissan Navara or the low beam bulbs on Nissan Navara, don’t be reluctant to browse our articles which describe you the procedure to follow.

Whenever you have any further questions about the Nissan Navara, do not hesitate to consult our Nissan Navara category.