Regardless whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are constantly functional is very important. In fact, bulbs are wearing units that will inevitably burn out after some time and consequently need to be changed. You’re probably in this article because one of your parking lights is burnt out and you’re struggling with how to change your Nissan Murano’s license plate bulb, we’ve created this content page to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Nissan Murano.
How to swap the license plate bulb on your Nissan Murano coming from the outside
This process is the least difficult of the two, in reality, for this one you will just require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this content page to describe the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan Murano. Regardless whether it’s the front or the back of your motor vehicle the technique will be similar.
Here are a few simple actions to follow to perform this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Murano
- Use your screwdriver or knife to remove the bulb from its spot, in the event you are scared of damaging anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the process.
.
How to change the number plate bulb on your Nissan Murano without outside access
Second part of our article, change this license plate bulb on your Nissan Murano without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Nissan Murano
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the motor vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Nissan Murano
Finally last option, you must swap the bulb on the backplate of your Nissan Murano, but you cannot open the cover from the outside of your motor vehicle. In such a case, here is the solution to execute this operation:
- Disconnect the battery from your Nissan Murano
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Nissan Murano, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Nissan Murano. If you desire to change other bulbs like the position light bulbs on your Nissan Murano or the low beam bulbs on Nissan Murano, don’t be reluctant to browse our articles which demonstrate you the process to follow.
In the event that you have any additional questions about the Nissan Murano, do not hesitate to consult our Nissan Murano category.
