It doesn’t matter if it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functioning is really important. In fact, bulbs are wearing units that will predictably burn out after some time and therefore need to be swapped out. You’re perhaps here because one of your parking lights is burnt out and you’re worried about how to change your Nissan Micra’s license plate bulb, we’ve written this content page to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Micra.
How to change the license plate bulb on your Nissan Micra coming from the outside
This solution is the simplest of the two, in reality, for this one you will only need to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this document to demonstrate the way.
So let’s begin with changing the number plate bulb by going through the outside of your Nissan Micra. It doesn’t matter if it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple guidelines to follow to carry out this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Micra
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are afraid of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the process.
.
How to replace the number plate bulb on your Nissan Micra without outside access
Second section of our content, change this license plate bulb on your Nissan Micra without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Nissan Micra
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Nissan Micra
Finally last option, you must change the bulb on the backplate of your Nissan Micra, but you cannot really open the cover from the outside of your automobile. In this instance, here is the tactic to accomplish this operation:
- Unplug the battery from your Nissan Micra
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Micra, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for changing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Nissan Micra. If you need to change other bulbs like the position light bulbs on your Nissan Micra or the low beam bulbs on Nissan Micra, don’t hesitate to consult our content articles which demonstrate you the procedure to follow.
To discover more tips on the Nissan Micra, take a look at the Nissan Micra category.
