Whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are all the time working is necessary. In fact, bulbs are wearing auto parts that will undoubtedly burn out after a while and as a consequence need to be replaced. You’re probably in this article because one of your parking lights is burnt out and you’re wondering how to change your Nissan Micra 4’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Nissan Micra 4.

change-license-plate-bulb-nissan-micra-4

How to change the license plate bulb on your Nissan Micra 4 throughout the outside

This method is the fastest of the two, actually, for this one you will just have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this content page to clarify the method.
So let’s start with changing the number plate bulb by going through the outside of your Nissan Micra 4. Whether it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple actions to follow to carry out this maintenance:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Micra 4
  • .

  • Use your screwdriver or knife to eject the bulb from its location, in the event that you are scared of destroying anything, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.

How to change the number plate bulb on your Nissan Micra 4 without outside access

Second section of our article, swap this license plate bulb on your Nissan Micra 4 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Nissan Micra 4

To change the one on the front plate, nothing could be less hard, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Nissan Micra 4

Finally last option, you must change the bulb on the backplate of your Nissan Micra 4, but you cannot open the cover from the outside of your vehicle. In such a case, here is the method to perform this operation:

  • Disconnect the battery from your Nissan Micra 4
  • Locate the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Nissan Micra 4, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main approaches for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Nissan Micra 4. If you want to change other bulbs like the position light bulbs on your Nissan Micra 4 or the low beam bulbs on Nissan Micra 4, don’t hesitate to browse our articles which describe you the operation to follow.

To get more tips on the Nissan Micra 4, take a look at the Nissan Micra 4 category.