It doesn’t matter if it’s for your specific safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly functioning is fundamental. In fact, bulbs are wearing auto parts that will inevitably burn out as time passes and therefore need to be swapped out. You’re probably in this article because one of your parking lights is burnt out and you’re questioning how to change your Nissan Cabstar’s license plate bulb, we’ve written this document to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Nissan Cabstar.
How to swap the license plate bulb on your Nissan Cabstar coming from the outside
This solution is the least difficult of the two, actually, for this one you will simply require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article content to teach you the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Nissan Cabstar. It doesn’t matter if it’s the front or the back of your vehicle the operation will be similar.
Here are a few simple steps to stick to to carry out this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Cabstar
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are scared of breaking something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the procedure.
.
How to replace the number plate bulb on your Nissan Cabstar without outside access
Second part of our document, swap this license plate bulb on your Nissan Cabstar without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Nissan Cabstar
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Nissan Cabstar
Finally last option, you must swap the bulb on the backplate of your Nissan Cabstar, but you simply cannot open the cover from the outside of your vehicle. In this case, here is the tactic to execute this task:
- Unplug the battery from your Nissan Cabstar
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Cabstar, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Nissan Cabstar. If you need to change other bulbs like the position light bulbs on your Nissan Cabstar or the low beam bulbs on Nissan Cabstar, don’t hesitate to read our articles which describe you the operation to follow.
If you need more tutorials on the Nissan Cabstar, go to our Nissan Cabstar category.
