Regardless whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are constantly operational is really important. Indeed, bulbs are wearing auto parts that will obviously burn out over the years and as a result need to be replaced. You’re most likely on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Armada’s license plate bulb, we’ve written this content page to help you do it on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Nissan Armada.

change-license-plate-bulb-nissan-armada

How to replace the license plate bulb on your Nissan Armada throughout the outside

This method is the most simple of the two, in truth, for this one you will just require to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this article content to explain the way.
So let’s start with replacing the number plate bulb by going through the outside of your Nissan Armada. Regardless whether it’s the front or the back of your motor vehicle the technique will be similar.
Here are a few simple guidelines to stick to to carry out this routine service:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Armada
  • .

  • Use your screwdriver or knife to remove the bulb from its location, in the event that you are worried of breaking a thing, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the success of the procedure.

How to change the number plate bulb on your Nissan Armada without outside access

Second section of our document, swap this license plate bulb on your Nissan Armada without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Nissan Armada

To replace the one on the front plate, nothing could be easier, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Nissan Armada

Finally last solution, you must replace the bulb on the backplate of your Nissan Armada, but you cannot really open the cover from the outside of your motor vehicle. In this case, here is the technique to do this operation:

  • Disconnect the battery from your Nissan Armada
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Nissan Armada, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main methods for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Nissan Armada. If you wish to change other bulbs like the position light bulbs on your Nissan Armada or the low beam bulbs on Nissan Armada, don’t be reluctant to consult our content articles which demonstrate you the process to follow.

Whenever you have any additional questions about the Nissan Armada, do not hesitate to consult our Nissan Armada category.