Regardless whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are all the time functioning is really important. In fact, bulbs are wearing units that will inevitably burn out after a while and therefore need to be changed. You’re most certainly on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Altima’s license plate bulb, we’ve written this article content to help you do it by yourself and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Altima.

change-license-plate-bulb-nissan-altima

How to replace the license plate bulb on your Nissan Altima coming from the outside

This tactic is the simplest of the two, in truth, for this one you will simply have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this article to demonstrate the method.
So let’s begin with changing the number plate bulb by going through the outside of your Nissan Altima. Regardless whether it’s the front or the back of your automobile the procedure will be the same.
Here are a few simple steps to stick to to perform this routine service:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Altima
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are scared of destroying something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the procedure.

How to replace the number plate bulb on your Nissan Altima without outside access

Second section of our content, replace this license plate bulb on your Nissan Altima without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Nissan Altima

To replace the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to replace the rear license plate bulb on my Nissan Altima

Finally last option, you must replace the bulb on the backplate of your Nissan Altima, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the approach to execute this operation:

  • Disconnect the battery from your Nissan Altima
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Nissan Altima, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to do it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Nissan Altima. If you desire to change other bulbs like the position light bulbs on your Nissan Altima or the low beam bulbs on Nissan Altima, don’t hesitate to consult our articles which explain you the operation to follow.

To find more tips on the Nissan Altima, take a look at the Nissan Altima category.