Whether it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are in every case functioning is fundamental. In reality, bulbs are wearing parts that will surely burn out over time and as a result need to be replaced. You’re quite likely on this website because one of your parking lights is burnt out and you’re questioning how to change your Mitsubishi Pajero 3’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mitsubishi Pajero 3.

change-license-plate-bulb-mitsubishi-pajero-3

How to change the license plate bulb on your Mitsubishi Pajero 3 coming from the outside

This method is the least difficult of the two, in truth, for this one you will just have to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this content to clarify the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Mitsubishi Pajero 3. Whether it’s the front or the back of your automobile the process will be identical.
Here are a few simple guidelines to follow to conduct this maintenance:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mitsubishi Pajero 3
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are worried of destroying a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to validate the achievement of the task.

How to replace the number plate bulb on your Mitsubishi Pajero 3 without outside access

Second section of our content, replace this license plate bulb on your Mitsubishi Pajero 3 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Mitsubishi Pajero 3

To change the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to change the rear license plate bulb on my Mitsubishi Pajero 3

Finally last option, you must change the bulb on the backplate of your Mitsubishi Pajero 3, but you cannot really open the cover from the outside of your automobile. In this instance, here is the solution to perform this operation:

  • Disconnect the battery from your Mitsubishi Pajero 3
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Mitsubishi Pajero 3, check it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main methods for replacing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Mitsubishi Pajero 3. If you desire to change other bulbs like the position light bulbs on your Mitsubishi Pajero 3 or the low beam bulbs on Mitsubishi Pajero 3, don’t be reluctant to consult our content articles which demonstrate you the procedure to follow.

To find more tips on the Mitsubishi Pajero 3, take a look at the Mitsubishi Pajero 3 category.