Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly effective is fundamental. In fact, bulbs are wearing auto parts that will inevitably burn out over the years and as a consequence need to be swapped out. You’re almost certainly here because one of your parking lights is burnt out and you’re wondering how to change your Mitsubishi Outlander Sport’s license plate bulb, we’ve written and published this document to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mitsubishi Outlander Sport.
How to swap the license plate bulb on your Mitsubishi Outlander Sport coming from the outside
This tactic is the fastest of the two, in truth, for this one you will just need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content page to describe the approach.
So let’s start with changing the number plate bulb by going through the outside of your Mitsubishi Outlander Sport. Whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple actions to stick to to conduct this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mitsubishi Outlander Sport
- Use your screwdriver or knife to eject the bulb from its location, if you are worried of breaking something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the task.
.
How to change the number plate bulb on your Mitsubishi Outlander Sport without outside access
Second section of our article, replace this license plate bulb on your Mitsubishi Outlander Sport without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mitsubishi Outlander Sport
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure otherwise you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Mitsubishi Outlander Sport
Finally last possibility, you must swap the bulb on the backplate of your Mitsubishi Outlander Sport, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the method to conduct this task:
- Unplug the battery from your Mitsubishi Outlander Sport
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mitsubishi Outlander Sport, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Mitsubishi Outlander Sport. If you need to change other bulbs like the position light bulbs on your Mitsubishi Outlander Sport or the low beam bulbs on Mitsubishi Outlander Sport, don’t hesitate to read our content articles which describe you the operation to follow.
To discover more tips on the Mitsubishi Outlander Sport, take a look at the Mitsubishi Outlander Sport category.
