Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is extremely important. Indeed, bulbs are wearing units that will undoubtedly burn out after some time and therefore need to be swapped out. You’re almost certainly on the website because one of your parking lights is burnt out and you’re worried about how to change your Mini Cooper’s license plate bulb, we’ve created this article to help you do it without any help and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mini Cooper.
How to swap the license plate bulb on your Mini Cooper through the outside
This tactic is the easiest of the two, in fact, for this one you will just have to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content to clarify the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Mini Cooper. Regardless it’s the front or the back of your motor vehicle the process will be identical.
Here are a few simple guidelines to follow to execute this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mini Cooper
- Use your screwdriver or knife to eject the bulb from its location, if you are scared of breaking anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the process.
.
How to change the number plate bulb on your Mini Cooper without outside access
Second part of our content, change this license plate bulb on your Mini Cooper without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mini Cooper
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Mini Cooper
Finally last possibility, you must swap the bulb on the backplate of your Mini Cooper, but you cannot open the cover from the outside of your motor vehicle. In this instance, here is the solution to perform this task:
- Disconnect the battery from your Mini Cooper
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mini Cooper, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Mini Cooper. If you desire to change other bulbs like the position light bulbs on your Mini Cooper or the low beam bulbs on Mini Cooper, don’t be reluctant to consult our content articles which demonstrate you the process to follow.
If you need more tutorials on the Mini Cooper, go to our Mini Cooper category.
