It doesn’t matter if it’s for your specific security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functional is really important. In reality, bulbs are wearing parts that will predictably burn out after some time and therefore need to be changed. You’re likely on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Mercedes Gla’s license plate bulb, we’ve written and published this article to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Gla.
How to swap the license plate bulb on your Mercedes Gla coming from the outside
This method is the easiest of the two, in fact, for this one you will simply have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this content page to demonstrate the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Mercedes Gla. It doesn’t matter if it’s the front or the back of your motor vehicle the method will be the same.
Here are a few simple guidelines to follow to carry out this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Gla
- Use your screwdriver or knife to remove the bulb from its placement, if you are worried of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to replace the number plate bulb on your Mercedes Gla without outside access
Second part of our content page, replace this license plate bulb on your Mercedes Gla without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mercedes Gla
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Mercedes Gla
Finally last option, you must swap the bulb on the backplate of your Mercedes Gla, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the approach to carry out this operation:
- Unplug the battery from your Mercedes Gla
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Gla, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Mercedes Gla. If you need to change other bulbs like the position light bulbs on your Mercedes Gla or the low beam bulbs on Mercedes Gla, don’t hesitate to read our articles which demonstrate you the process to follow.
If you need more guides on the Mercedes Gla, go to our Mercedes Gla category.
