Regardless it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always functional is fundamental. In fact, bulbs are wearing auto parts that will inevitably burn out as time passes and therefore need to be replaced. You’re most likely in this article because one of your parking lights is burnt out and you’re struggling with how to change your Mercedes Classe C 4’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Classe C 4.
How to swap the license plate bulb on your Mercedes Classe C 4 coming from the outside
This method is the simplest of the two, in reality, for this one you will just have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this content page to demonstrate the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Mercedes Classe C 4. Regardless it’s the front or the back of your automobile the technique will be the same.
Here are a few simple actions to stick to to conduct this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe C 4
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are afraid of destroying anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the success of the operation.
.
How to change the number plate bulb on your Mercedes Classe C 4 without outside access
Second part of our content, swap this license plate bulb on your Mercedes Classe C 4 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mercedes Classe C 4
To swap the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Mercedes Classe C 4
Finally last solution, you must swap the bulb on the backplate of your Mercedes Classe C 4, but you are not able to open the cover from the outside of your automobile. In this case, here is the process to operate this operation:
- Unplug the battery from your Mercedes Classe C 4
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Classe C 4, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Mercedes Classe C 4. If you wish to change other bulbs like the position light bulbs on your Mercedes Classe C 4 or the low beam bulbs on Mercedes Classe C 4, don’t hesitate to browse our articles which describe you the process to follow.
To get more tips on the Mercedes Classe C 4, take a look at the Mercedes Classe C 4 category.
