Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always functional is necessary. Indeed, bulbs are wearing units that will surely burn out in the future and as a consequence need to be swapped out. You’re most certainly on this site because one of your parking lights is burnt out and you’re struggling with how to change your Mercedes Classe C 2’s license plate bulb, we’ve written this content to help you do it without any help and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Classe C 2.
How to change the license plate bulb on your Mercedes Classe C 2 through the outside
This approach is the most simple of the two, in fact, for this one you will just need to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second section of this document to clarify the method.
So let’s start with changing the number plate bulb by going through the outside of your Mercedes Classe C 2. Whether it’s the front or the back of your car the method will be the same.
Here are a few simple actions to stick to to execute this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe C 2
- Use your screwdriver or knife to eject the bulb from its location, in the event you are worried of damaging anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the operation.
.
How to replace the number plate bulb on your Mercedes Classe C 2 without outside access
Second section of our content page, swap this license plate bulb on your Mercedes Classe C 2 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Mercedes Classe C 2
To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure or you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Mercedes Classe C 2
Finally last solution, you must change the bulb on the backplate of your Mercedes Classe C 2, but you cannot really open the cover from the outside of your car. In this instance, here is the tactic to accomplish this operation:
- Disconnect the battery from your Mercedes Classe C 2
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Classe C 2, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for changing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Mercedes Classe C 2. If you desire to change other bulbs like the position light bulbs on your Mercedes Classe C 2 or the low beam bulbs on Mercedes Classe C 2, don’t be reluctant to consult our articles which describe you the operation to follow.
To discover more tips on the Mercedes Classe C 2, take a look at the Mercedes Classe C 2 category.
