Regardless whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are in every case operational is necessary. In reality, bulbs are wearing units that will surely burn out over time and as a result need to be swapped out. You’re almost certainly here because one of your parking lights is burnt out and you’re worried about how to change your Mercedes Benz S Class’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Benz S Class.
How to change the license plate bulb on your Mercedes Benz S Class through the outside
This approach is the quickest of the two, in reality, for this one you will only have to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article content to describe the way.
So let’s start with changing the number plate bulb by going through the outside of your Mercedes Benz S Class. Regardless whether it’s the front or the back of your automobile the process will be similar.
Here are a few simple steps to stick to to conduct this service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Benz S Class
- Use your screwdriver or knife to remove the bulb from its place, if you are afraid of destroying anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the achievement of the task.
.
How to change the number plate bulb on your Mercedes Benz S Class without outside access
Second part of our article, swap this license plate bulb on your Mercedes Benz S Class without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Mercedes Benz S Class
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Mercedes Benz S Class
Finally last option, you must change the bulb on the backplate of your Mercedes Benz S Class, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the solution to conduct this operation:
- Unplug the battery from your Mercedes Benz S Class
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Benz S Class, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Mercedes Benz S Class. If you need to change other bulbs like the position light bulbs on your Mercedes Benz S Class or the low beam bulbs on Mercedes Benz S Class, don’t hesitate to read our articles which describe you the operation to follow.
To discover more tips on the Mercedes Benz S Class, take a look at the Mercedes Benz S Class category.
