Regardless whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time operational is extremely important. In fact, bulbs are wearing parts that will predictably burn out with time and as a consequence need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re struggling with how to change your Mazda CX 5’s license plate bulb, we’ve written this article to help you do it by yourself and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mazda CX 5.

change-license-plate-bulb-mazda-cx-5

How to swap the license plate bulb on your Mazda CX 5 throughout the outside

This process is the quickest of the two, in truth, for this one you will only have to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this article content to clarify the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Mazda CX 5. Regardless whether it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple actions to stick to to execute this service:

  • With the engine turned off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mazda CX 5
  • .

  • Use your screwdriver or knife to eject the bulb from its place, if you are worried of damaging something, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the task.

How to replace the number plate bulb on your Mazda CX 5 without outside access

Second section of our item, change this license plate bulb on your Mazda CX 5 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Mazda CX 5

To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Mazda CX 5

Finally last solution, you must swap the bulb on the backplate of your Mazda CX 5, but you cannot open the cover from the outside of your automobile. In such a case, here is the method to operate this operation:

  • Unplug the battery from your Mazda CX 5
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Mazda CX 5, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main methods for replacing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Mazda CX 5. If you need to change other bulbs like the position light bulbs on your Mazda CX 5 or the low beam bulbs on Mazda CX 5, don’t hesitate to consult our articles which explain you the operation to follow.

To find more tips on the Mazda CX 5, take a look at the Mazda CX 5 category.