Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are all the time effective is very important. In reality, bulbs are wearing units that will obviously burn out in the future and as a consequence need to be swapped out. You’re likely on the website because one of your parking lights is burnt out and you’re worried about how to change your Maserati Levante’s license plate bulb, we’ve written and published this document to help you do it without any help and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Maserati Levante.

change-license-plate-bulb-maserati-levante

How to replace the license plate bulb on your Maserati Levante coming from the outside

This solution is the least difficult of the two, in reality, for this one you will just have to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this content to show you the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Maserati Levante. Regardless it’s the front or the back of your motor vehicle the procedure will be the same.
Here are a few simple guidelines to follow to conduct this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Maserati Levante
  • .

  • Use your screwdriver or knife to eject the bulb from its location, if you are worried of damaging something, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the process.

How to change the number plate bulb on your Maserati Levante without outside access

Second section of our document, swap this license plate bulb on your Maserati Levante without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Maserati Levante

To replace the one on the front plate, nothing could be much easier, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Maserati Levante

Finally last possibility, you must replace the bulb on the backplate of your Maserati Levante, but you cannot really open the cover from the outside of your motor vehicle. In this case, here is the approach to execute this task:

  • Disconnect the battery from your Maserati Levante
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Maserati Levante, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Maserati Levante. If you want to change other bulbs like the position light bulbs on your Maserati Levante or the low beam bulbs on Maserati Levante, don’t hesitate to browse our content articles which explain you the procedure to follow.

If you want more guides on the Maserati Levante, go to our Maserati Levante category.