It doesn’t matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are all the time functional is extremely important. In fact, bulbs are wearing units that will predictably burn out over the years and consequently need to be swapped out. You’re probably on the website because one of your parking lights is burnt out and you’re struggling with how to change your Lincoln MKX’s license plate bulb, we’ve written this document to help you do it on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Lincoln MKX.

change-license-plate-bulb-lincoln-mkx

How to swap the license plate bulb on your Lincoln MKX through the outside

This tactic is the fastest of the two, in reality, for this one you will simply require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content page to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Lincoln MKX. It doesn’t matter if it’s the front or the back of your motor vehicle the procedure will be the same.
Here are a few simple actions to stick to to perform this maintenance tasks:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lincoln MKX
  • .

  • Use your screwdriver or knife to remove the bulb from its spot, in the event that you are afraid of damaging something, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to validate the success of the process.

How to change the number plate bulb on your Lincoln MKX without outside access

Second part of our content page, change this license plate bulb on your Lincoln MKX without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Lincoln MKX

To swap the one on the front plate, nothing could be much easier, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.

How to swap the rear license plate bulb on my Lincoln MKX

Finally last possibility, you must swap the bulb on the backplate of your Lincoln MKX, but you are not able to open the cover from the outside of your motor vehicle. In this instance, here is the method to operate this operation:

  • Unplug the battery from your Lincoln MKX
  • Identify the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Lincoln MKX, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Lincoln MKX. If you want to change other bulbs like the position light bulbs on your Lincoln MKX or the low beam bulbs on Lincoln MKX, don’t be reluctant to browse our content articles which describe you the operation to follow.

Whenever you have any additional questions about the Lincoln MKX, do not hesitate to consult our Lincoln MKX category.