Whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is extremely important. Indeed, bulbs are wearing auto parts that will inevitably burn out in the future and as a result need to be changed. You’re probably on the website because one of your parking lights is burnt out and you’re wondering how to change your Lincoln MKC’s license plate bulb, we’ve written and published this content to help you do it on your own and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Lincoln MKC.
How to change the license plate bulb on your Lincoln MKC throughout the outside
This technique is the easiest of the two, in fact, for this one you will simply need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this content page to teach you the approach.
So let’s start with changing the number plate bulb by going through the outside of your Lincoln MKC. Whether it’s the front or the back of your vehicle the operation will be similar.
Here are a few simple guidelines to follow to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lincoln MKC
- Use your screwdriver or knife to remove the bulb from its place, in the event you are scared of destroying a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the process.
.
How to replace the number plate bulb on your Lincoln MKC without outside access
Second section of our content page, replace this license plate bulb on your Lincoln MKC without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Lincoln MKC
To change the one on the front plate, nothing could be simpler, you will have to position yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Lincoln MKC
Finally last option, you must change the bulb on the backplate of your Lincoln MKC, but you simply cannot open the cover from the outside of your vehicle. In this instance, here is the solution to do this task:
- Disconnect the battery from your Lincoln MKC
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Lincoln MKC, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Lincoln MKC. If you want to change other bulbs like the position light bulbs on your Lincoln MKC or the low beam bulbs on Lincoln MKC, don’t be reluctant to browse our content articles which describe you the operation to follow.
Whenever you have any additional questions about the Lincoln MKC, do not hesitate to consult our Lincoln MKC category.
