Regardless it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly functioning is very important. In reality, bulbs are wearing units that will undoubtedly burn out over the years and as a result need to be changed. You’re most likely here because one of your parking lights is burnt out and you’re struggling with how to change your Lexus RX’s license plate bulb, we’ve written this content to help you do it on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Lexus RX.
How to change the license plate bulb on your Lexus RX through the outside
This solution is the fastest of the two, in fact, for this one you will only have to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this document to demonstrate the way.
So let’s begin with changing the number plate bulb by going through the outside of your Lexus RX. Regardless it’s the front or the back of your automobile the process will be similar.
Here are a few simple actions to follow to execute this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus RX
- Use your screwdriver or knife to eject the bulb from its placement, if you are worried of damaging something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your Lexus RX without outside access
Second section of our document, change this license plate bulb on your Lexus RX without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Lexus RX
To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Lexus RX
Finally last solution, you must change the bulb on the backplate of your Lexus RX, but you cannot really open the cover from the outside of your automobile. In this case, here is the solution to operate this operation:
- Unplug the battery from your Lexus RX
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Lexus RX, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for changing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Lexus RX. If you wish to change other bulbs like the position light bulbs on your Lexus RX or the low beam bulbs on Lexus RX, don’t be reluctant to browse our content articles which demonstrate you the procedure to follow.
Whenever you have any additional questions about the Lexus RX, do not hesitate to consult our Lexus RX category.
