Regardless it’s for your specific security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are in every case effective is fundamental. In fact, bulbs are wearing units that will undoubtedly burn out over the years and consequently need to be changed. You’re perhaps on the website because one of your parking lights is burnt out and you’re worried about how to change your Lexus NX’s license plate bulb, we’ve made this document to help you do it on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Lexus NX.
How to change the license plate bulb on your Lexus NX through the outside
This process is the least difficult of the two, in reality, for this one you will just need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article content to demonstrate the method.
So let’s begin with changing the number plate bulb by going through the outside of your Lexus NX. Regardless it’s the front or the back of your vehicle the method will be similar.
Here are a few simple actions to follow to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus NX
- Use your screwdriver or knife to eject the bulb from its location, if you are scared of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the procedure.
.
How to change the number plate bulb on your Lexus NX without outside access
Second part of our document, swap this license plate bulb on your Lexus NX without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Lexus NX
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much force or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Lexus NX
Finally last solution, you must change the bulb on the backplate of your Lexus NX, but you cannot really open the cover from the outside of your vehicle. In this instance, here is the approach to perform this task:
- Unplug the battery from your Lexus NX
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Lexus NX, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for changing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Lexus NX. If you wish to change other bulbs like the position light bulbs on your Lexus NX or the low beam bulbs on Lexus NX, don’t hesitate to read our content articles which explain you the operation to follow.
To get more tips on the Lexus NX, take a look at the Lexus NX category.
