Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is necessary. In reality, bulbs are wearing units that will predictably burn out as time passes and as a consequence need to be changed. You’re likely on this site because one of your parking lights is burnt out and you’re struggling with how to change your Lexus GX’s license plate bulb, we’ve written this article to help you do it without any help and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Lexus GX.
How to replace the license plate bulb on your Lexus GX throughout the outside
This technique is the least difficult of the two, in reality, for this one you will only need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this article content to demonstrate the method.
So let’s start with replacing the number plate bulb by going through the outside of your Lexus GX. Whether it’s the front or the back of your automobile the technique will be similar.
Here are a few simple actions to stick to to perform this routine service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus GX
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are scared of breaking a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the operation.
.
How to replace the number plate bulb on your Lexus GX without outside access
Second section of our item, change this license plate bulb on your Lexus GX without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Lexus GX
To replace the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Lexus GX
Finally last option, you must replace the bulb on the backplate of your Lexus GX, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the method to perform this task:
- Disconnect the battery from your Lexus GX
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Lexus GX, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Lexus GX. If you wish to change other bulbs like the position light bulbs on your Lexus GX or the low beam bulbs on Lexus GX, don’t hesitate to browse our articles which describe you the process to follow.
Whenever you have any further questions about the Lexus GX, do not hesitate to consult our Lexus GX category.
