Whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are all the time functioning is fundamental. In fact, bulbs are wearing parts that will surely burn out over the years and as a result need to be replaced. You’re most likely on the website because one of your parking lights is burnt out and you’re worried about how to change your Lexus GS’s license plate bulb, we’ve made this content page to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Lexus GS.

change-license-plate-bulb-lexus-gs

How to replace the license plate bulb on your Lexus GS coming from the outside

This solution is the easiest of the two, in fact, for this one you will just require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content to explain the method.
So let’s start with replacing the number plate bulb by going through the outside of your Lexus GS. Whether it’s the front or the back of your automobile the method will be the same.
Here are a few simple guidelines to stick to to execute this maintenance tasks:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus GS
  • .

  • Use your screwdriver or knife to remove the bulb from its spot, in the event that you are scared of destroying a thing, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the procedure.

How to change the number plate bulb on your Lexus GS without outside access

Second part of our document, replace this license plate bulb on your Lexus GS without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Lexus GS

To replace the one on the front plate, nothing could be much easier, you will have to position yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force otherwise you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Lexus GS

Finally last option, you must replace the bulb on the backplate of your Lexus GS, but you cannot open the cover from the outside of your automobile. In such a case, here is the process to perform this task:

  • Unplug the battery from your Lexus GS
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Lexus GS, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main methods for replacing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Lexus GS. If you want to change other bulbs like the position light bulbs on your Lexus GS or the low beam bulbs on Lexus GS, don’t be reluctant to consult our content articles which explain you the process to follow.

If you need more guides on the Lexus GS, go to our Lexus GS category.