Whether it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time functioning is extremely important. In fact, bulbs are wearing parts that will undoubtedly burn out after some time and as a result need to be replaced. You’re likely on this website because one of your parking lights is burnt out and you’re wondering how to change your Lexus ES’s license plate bulb, we’ve written and published this article content to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Lexus ES.
How to swap the license plate bulb on your Lexus ES throughout the outside
This technique is the fastest of the two, in fact, for this one you will only require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this content page to teach you the method.
So let’s start with swapping the number plate bulb by going through the outside of your Lexus ES. Whether it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple guidelines to stick to to execute this service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus ES
- Use your screwdriver or knife to remove the bulb from its place, in the event you are worried of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the task.
.
How to replace the number plate bulb on your Lexus ES without outside access
Second part of our document, swap this license plate bulb on your Lexus ES without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Lexus ES
To swap the one on the front plate, nothing could be much easier, you will have to position yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Lexus ES
Finally last option, you must swap the bulb on the backplate of your Lexus ES, but you simply cannot open the cover from the outside of your vehicle. In this case, here is the approach to perform this task:
- Unplug the battery from your Lexus ES
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Lexus ES, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for swapping license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Lexus ES. If you want to change other bulbs like the position light bulbs on your Lexus ES or the low beam bulbs on Lexus ES, don’t hesitate to consult our articles which describe you the procedure to follow.
If perhaps you have any additional questions about the Lexus ES, do not hesitate to consult our Lexus ES category.
