Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are always functional is necessary. Indeed, bulbs are wearing auto parts that will predictably burn out after awhile and consequently need to be changed. You’re most likely on this site because one of your parking lights is burnt out and you’re questioning how to change your Land Rover Range Rover Sport’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Land Rover Range Rover Sport.
How to replace the license plate bulb on your Land Rover Range Rover Sport through the outside
This solution is the fastest of the two, actually, for this one you will just require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this article content to clarify the method.
So let’s start with swapping the number plate bulb by going through the outside of your Land Rover Range Rover Sport. Whether it’s the front or the back of your automobile the operation will be the same.
Here are a few simple steps to follow to carry out this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Land Rover Range Rover Sport
- Use your screwdriver or knife to eject the bulb from its spot, if you are worried of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the operation.
.
How to replace the number plate bulb on your Land Rover Range Rover Sport without outside access
Second part of our content page, change this license plate bulb on your Land Rover Range Rover Sport without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Land Rover Range Rover Sport
To replace the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Land Rover Range Rover Sport
Finally last solution, you must replace the bulb on the backplate of your Land Rover Range Rover Sport, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the approach to do this operation:
- Disconnect the battery from your Land Rover Range Rover Sport
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Land Rover Range Rover Sport, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Land Rover Range Rover Sport. If you need to change other bulbs like the position light bulbs on your Land Rover Range Rover Sport or the low beam bulbs on Land Rover Range Rover Sport, don’t be reluctant to read our articles which explain you the operation to follow.
If perhaps you have any further questions about the Land Rover Range Rover Sport, do not hesitate to consult our Land Rover Range Rover Sport category.
