Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly functioning is fundamental. In reality, bulbs are wearing units that will inevitably burn out over time and as a consequence need to be changed. You’re perhaps on this website because one of your parking lights is burnt out and you’re wondering how to change your Land Rover Range Rover Evoque’s license plate bulb, we’ve written and published this document to help you do it without any help and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Land Rover Range Rover Evoque.
How to change the license plate bulb on your Land Rover Range Rover Evoque through the outside
This solution is the fastest of the two, actually, for this one you will just need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content page to explain the way.
So let’s start with replacing the number plate bulb by going through the outside of your Land Rover Range Rover Evoque. Whether it’s the front or the back of your motor vehicle the operation will be similar.
Here are a few simple actions to follow to carry out this routine service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Land Rover Range Rover Evoque
- Use your screwdriver or knife to eject the bulb from its location, if you are afraid of breaking something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the success of the procedure.
.
How to change the number plate bulb on your Land Rover Range Rover Evoque without outside access
Second part of our content page, replace this license plate bulb on your Land Rover Range Rover Evoque without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Land Rover Range Rover Evoque
To change the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Land Rover Range Rover Evoque
Finally last option, you must change the bulb on the backplate of your Land Rover Range Rover Evoque, but you are not able to open the cover from the outside of your motor vehicle. In this instance, here is the approach to do this task:
- Unplug the battery from your Land Rover Range Rover Evoque
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Land Rover Range Rover Evoque, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for replacing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Land Rover Range Rover Evoque. If you want to change other bulbs like the position light bulbs on your Land Rover Range Rover Evoque or the low beam bulbs on Land Rover Range Rover Evoque, don’t be reluctant to browse our articles which describe you the process to follow.
To get more tips on the Land Rover Range Rover Evoque, take a look at the Land Rover Range Rover Evoque category.
