It doesn’t matter if it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case working is fundamental. In fact, bulbs are wearing auto parts that will predictably burn out over the years and consequently need to be changed. You’re likely on the website because one of your parking lights is burnt out and you’re wondering how to change your Land Rover Freelander’s license plate bulb, we’ve written this article content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Land Rover Freelander.
How to swap the license plate bulb on your Land Rover Freelander throughout the outside
This tactic is the fastest of the two, actually, for this one you will only have to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this content to clarify the way.
So let’s begin with changing the number plate bulb by going through the outside of your Land Rover Freelander. It doesn’t matter if it’s the front or the back of your automobile the method will be identical.
Here are a few simple steps to stick to to execute this service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Land Rover Freelander
- Use your screwdriver or knife to eject the bulb from its location, if you are worried of destroying a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the task.
.
How to change the number plate bulb on your Land Rover Freelander without outside access
Second section of our item, swap this license plate bulb on your Land Rover Freelander without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Land Rover Freelander
To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Land Rover Freelander
Finally last possibility, you must swap the bulb on the backplate of your Land Rover Freelander, but you simply cannot open the cover from the outside of your automobile. In this case, here is the method to do this operation:
- Unplug the battery from your Land Rover Freelander
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Land Rover Freelander, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for changing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Land Rover Freelander. If you want to change other bulbs like the position light bulbs on your Land Rover Freelander or the low beam bulbs on Land Rover Freelander, don’t be reluctant to consult our content articles which explain you the process to follow.
If you wish more tutorials on the Land Rover Freelander, go to our Land Rover Freelander category.
