Whether it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly functioning is very important. In fact, bulbs are wearing auto parts that will obviously burn out in the future and as a consequence need to be changed. You’re almost certainly on this website because one of your parking lights is burnt out and you’re questioning how to change your Kia Venga’s license plate bulb, we’ve made this document to help you do it without any help and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia Venga.
How to swap the license plate bulb on your Kia Venga throughout the outside
This technique is the simplest of the two, actually, for this one you will only need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this article content to show you the approach.
So let’s start with changing the number plate bulb by going through the outside of your Kia Venga. Whether it’s the front or the back of your automobile the operation will be the same.
Here are a few simple actions to stick to to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Venga
- Use your screwdriver or knife to eject the bulb from its place, in the event you are worried of damaging anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Kia Venga without outside access
Second section of our item, swap this license plate bulb on your Kia Venga without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Kia Venga
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Kia Venga
Finally last possibility, you must swap the bulb on the backplate of your Kia Venga, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the approach to execute this operation:
- Unplug the battery from your Kia Venga
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Kia Venga, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for changing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Kia Venga. If you need to change other bulbs like the position light bulbs on your Kia Venga or the low beam bulbs on Kia Venga, don’t be reluctant to consult our articles which demonstrate you the process to follow.
To discover more tips on the Kia Venga, take a look at the Kia Venga category.
