It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time functioning is really important. In fact, bulbs are wearing parts that will predictably burn out with time and as a result need to be swapped out. You’re likely on the website because one of your parking lights is burnt out and you’re wondering how to change your Kia Soul’s license plate bulb, we’ve written this article content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Kia Soul.

change-license-plate-bulb-kia-soul

How to swap the license plate bulb on your Kia Soul coming from the outside

This solution is the most simple of the two, actually, for this one you will simply have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this document to explain the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Kia Soul. It doesn’t matter if it’s the front or the back of your automobile the operation will be identical.
Here are a few simple steps to stick to to conduct this maintenance tasks:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Soul
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event that you are afraid of destroying something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the procedure.

How to change the number plate bulb on your Kia Soul without outside access

Second section of our document, replace this license plate bulb on your Kia Soul without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Kia Soul

To swap the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to swap the rear license plate bulb on my Kia Soul

Finally last possibility, you must swap the bulb on the backplate of your Kia Soul, but you cannot really open the cover from the outside of your automobile. In this case, here is the solution to execute this operation:

  • Unplug the battery from your Kia Soul
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Kia Soul, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Kia Soul. If you want to change other bulbs like the position light bulbs on your Kia Soul or the low beam bulbs on Kia Soul, don’t be reluctant to read our content articles which demonstrate you the procedure to follow.

If perhaps you have any further questions about the Kia Soul, do not hesitate to consult our Kia Soul category.