Regardless it’s for your own security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are always effective is extremely important. In fact, bulbs are wearing parts that will inevitably burn out after some time and consequently need to be swapped out. You’re quite likely on the website because one of your parking lights is burnt out and you’re wondering how to change your Kia Sedona’s license plate bulb, we’ve written and published this document to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia Sedona.
How to change the license plate bulb on your Kia Sedona through the outside
This method is the least difficult of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second part of this article content to teach you the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Kia Sedona. Regardless it’s the front or the back of your automobile the procedure will be the same.
Here are a few simple actions to follow to conduct this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Sedona
- Use your screwdriver or knife to remove the bulb from its location, in the event you are afraid of destroying anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the operation.
.
How to change the number plate bulb on your Kia Sedona without outside access
Second part of our item, replace this license plate bulb on your Kia Sedona without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Kia Sedona
To change the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Kia Sedona
Finally last solution, you must change the bulb on the backplate of your Kia Sedona, but you cannot really open the cover from the outside of your automobile. In such a case, here is the tactic to accomplish this task:
- Disconnect the battery from your Kia Sedona
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Kia Sedona, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for swapping license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Kia Sedona. If you want to change other bulbs like the position light bulbs on your Kia Sedona or the low beam bulbs on Kia Sedona, don’t be reluctant to consult our content articles which explain you the operation to follow.
If you wish more guides on the Kia Sedona, go to our Kia Sedona category.
