It doesn’t matter if it’s for your own personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time functioning is extremely important. In fact, bulbs are wearing auto parts that will obviously burn out in the future and as a result need to be replaced. You’re most certainly here because one of your parking lights is burnt out and you’re wanting to know how to change your Kia Forte’s license plate bulb, we’ve written and published this content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia Forte.

change-license-plate-bulb-kia-forte

How to swap the license plate bulb on your Kia Forte throughout the outside

This process is the simplest of the two, in truth, for this one you will simply need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this content page to demonstrate the way.
So let’s start with changing the number plate bulb by going through the outside of your Kia Forte. It doesn’t matter if it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple steps to follow to execute this routine service:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Forte
  • .

  • Use your screwdriver or knife to remove the bulb from its placement, in the event you are worried of damaging a thing, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the process.

How to replace the number plate bulb on your Kia Forte without outside access

Second part of our document, replace this license plate bulb on your Kia Forte without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Kia Forte

To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to swap the rear license plate bulb on my Kia Forte

Finally last solution, you must swap the bulb on the backplate of your Kia Forte, but you cannot really open the cover from the outside of your automobile. In this instance, here is the process to execute this operation:

  • Unplug the battery from your Kia Forte
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Kia Forte, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Kia Forte. If you wish to change other bulbs like the position light bulbs on your Kia Forte or the low beam bulbs on Kia Forte, don’t hesitate to browse our content articles which explain you the procedure to follow.

If you need more tutorials on the Kia Forte, go to our Kia Forte category.