It doesn’t matter if it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always effective is necessary. Indeed, bulbs are wearing units that will surely burn out after some time and as a consequence need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re questioning how to change your Kia Carens’s license plate bulb, we’ve written this article to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia Carens.
How to change the license plate bulb on your Kia Carens through the outside
This technique is the easiest of the two, in truth, for this one you will simply require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article to demonstrate the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Kia Carens. It doesn’t matter if it’s the front or the back of your car the operation will be similar.
Here are a few simple steps to follow to perform this service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Carens
- Use your screwdriver or knife to remove the bulb from its placement, if you are scared of destroying something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the task.
.
How to replace the number plate bulb on your Kia Carens without outside access
Second section of our content page, replace this license plate bulb on your Kia Carens without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Kia Carens
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Kia Carens
Finally last option, you must change the bulb on the backplate of your Kia Carens, but you cannot open the cover from the outside of your car. In this case, here is the solution to do this operation:
- Disconnect the battery from your Kia Carens
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Kia Carens, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main ways for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Kia Carens. If you desire to change other bulbs like the position light bulbs on your Kia Carens or the low beam bulbs on Kia Carens, don’t be reluctant to read our content articles which explain you the process to follow.
If you have any further questions about the Kia Carens, do not hesitate to consult our Kia Carens category.
